The MRMS4310 hose management kit for straight hoses on a runway will attach straight hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one runway.

Straight hose and regulator can be purchased separately.

The MRMS4311 hose management kit for straight hoses on a bridge will attach straight hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one bridge.

Straight hose and regulator can be purchased separately.

The MRMS4309 hose management kit for coiled hoses on a bridge will attach coiled hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one bridge.

Coiled hose and regulator can be purchased separately.

The MRMS4308 hose management kit for coiled hoses on a runway will attach coiled hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one runway.

Coiled hose and regulator can be purchased separately.

Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS42182 hanger has up to 1.5″ of vertical adjustability. When using the Extended Stack I-Beam Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.

For greater adjustability, please see MRHS42184.

Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHA40351 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.

Knight’s 24″ and 36″ Limit Ramp Assemblies are used to limit the KET3000 movement from within a predetermined work area. (2) are required.

Attaches to Knight’s RAD4110, RAD6110, and RAD7510 Aluminum Series Rail Systems. Knight’s MRMA4488 Filter/ Regulator Bracket Assembly controls the air flow to the workstation crane system.

Carries festooning or cable for Knight’s RAD4110, RAD6110, and RAD7510 Series Overhead Aluminum Rail Systems. Knight’s MRMA4494 travels on a tag line on the side of the rail system and uses the complete length of the rail, which results in zero stack-up lengths. Alternate the “U” bolts from inside to outside when installing festoon hose. This will allow for minimal stack-up lengths.

Knight Global’s MRES4476 suspends Knight single or dual bridges. Same plane end trucks low profile design reduces stack-up heights by 11.5 in. and is designed to elevate the bridge to the same height as the runway. Knight End Trucks are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield