Knight’s ETA1018 Tow Bar Assembly connects Knight’s KET3000 Tractor to a carriage trolley. It can also be used trolley to trolley, as well.

Knight’s 24″ and 36″ Limit Ramp Assemblies are used to limit the KET3000 movement from within a predetermined work area. (2) are required.

Knight’s KCA1045 Pendant Cable Kit tethers the KET3000 Tractor to the KCA1020 Pendant Handle in order to relieve stress on the communications cable (5m).

Includes KCA1032 Mount Bracket, 15ft long cable, (2) barrel clamps, (2) wire thimbles, and a spiral wrap.

Allows for the Quick Connection of Knight’s DSD Series Rail without welding. Knight’s L-Connector, connects DSD rail perpendicular to each other. The DSA L-Connector is available in Aluminum Only, and comes in (2) two inside diameter sizes: DSAAL1138 & DSAAL1168.

Allows for the Quick Connection of Knight’s DSD Series Rail without welding. Knight’s T-Connector, connects DSD rail perpendicular to each other. The DSA T-Connector is available in Steel or Aluminum, and comes in (2) two inside diameter sizes.

Allows for the Quick Connection of Knight’s DSD Series Rail without welding. Knight’s Straight Connector, connects DSD rail in Horizontal and Vertical Positions. The DSA Straight Connector is available in Steel or Aluminum, and comes in (2) two inside diameter sizes.

The MHAA3025 attaches to the HAD3000 series rail. The Air Outlet attaches to the top of the rail and is used to distribute air from the rail.

The MHAA3015 attaches to the HAD3000 series rail. The Air Outlet attaches to the top of the rail and is used to distribute air from the rail.

Attaches to the MHTA3013 Load Trolley. MHMA3181 Cable and Hose Saddle supports a hose width of 1.5 in. and reduces stack-up widths.

Attaches to the MHTA3013 Load Trolley. MHMA3180 Cable and Hose Saddle supports a hose width of 0.75 in. and allows minimal stack-up widths.