The KSAA1066 Speed Hoist Chain Hook attaches to Knight’s 4mm chain on the SDS Speed Hoist. The Hook is equipped with a 1 ton capacity Crosby/Bullard® Golden Gate size 2 Pin-Lok Hook with self closing gate and 360° rotational capabilities. The KSAA1066 is equipped with a connection for a drop stop safety chain.
(Formerly KLCA1033)

The EMRMA6172 Cord Clamp is used in conjunction with the ERail trolley to prevent damage to the electrical cable as the trolley travels through the rail.

Knight Global’s AOA9050 Arm Stop Assembly is used when there is a need to limit the vertical travel on an arm. They can be adjusted to limit the up and down vertical travel independently at any position within the travel of the arm.

Knight Global’s AOA7050 Arm Stop Assembly is used when there is a need to limit the vertical travel on an arm. They can be adjusted to limit the up and down vertical travel independently at any position within the travel of the arm.

The TRA5005 Tow Bar Assemblies are used in conjunction with the TRA5500 Air Tractor to stop the bridge from skewing while the Air Tractor is pushing or pulling a bridge or runway.

The TRA5005-6110 runs in Knight’s RAD6110 aluminum rail and the TRA5005-7510 runs the RAD7510 aluminum rail. Both tow bars can tow Knight’s RAD4110, RAD6110, or RAD7510 bridges.

Knight’s ETA1059 Tow Bar Assembly Connects Knight’s KET3000 Tractor to a Knight End Truck.

Knight’s ETA1018 Tow Bar Assembly connects Knight’s KET3000 Tractor to a carriage trolley. It can also be used trolley to trolley, as well.

Knight’s 24″ and 36″ Limit Ramp Assemblies are used to limit the KET3000 movement from within a predetermined work area. (2) are required.

Knight’s KCA1045 Pendant Cable Kit tethers the KET3000 Tractor to the KCA1020 Pendant Handle in order to relieve stress on the communications cable (5m).

Includes KCA1032 Mount Bracket, 15ft long cable, (2) barrel clamps, (2) wire thimbles, and a spiral wrap.

Allows for the Quick Connection of Knight’s DSD Series Rail without welding. Knight’s L-Connector, connects DSD rail perpendicular to each other. The DSA L-Connector is available in Aluminum Only, and comes in (2) two inside diameter sizes: DSAAL1138 & DSAAL1168.