The MREA4018 End Truck Connector suspends Knight’s RAD4110 bridges with the use of a Knight trolley. Knight End Trucks are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

The MRMA4301 Cable Saddle with Velcro Straps supports the electric or pneumatic festooning for the overhead rail systems. The velcro straps allow for fast and easy installation of the electrical cables or pneumatic hoses.

Knight Global’s MRTA6119 transfers loads along the horizontal axis and suspends Knight arm carriages and fixtures from Knight’s RAD6110 series overhead aluminum rail systems.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA6121 transfers loads along the horizontal axis and suspends Knight arm carriages from Knight’s RAD6110 series overhead aluminum rail systems.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA6124 transfers loads along the horizontal axis and suspends Knight torque tubes and arm carriages from Knight’s RAD6110 series overhead aluminum rail systems. Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA6103 transfers loads along the horizontal axis and suspends fixtures from Knight’s RAD6110 series overhead aluminum rail systems. Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Used for Direct Loads Only, suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using Knight’s MRHS4500 Hanger, structural steel can only be run perpendicular to the Knight rail system.

Used for Direct Loads Only, suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using Knight’s MRHS4503 Hanger, structural steel can only be run parallel to the Knight rail system.

Used for Direct or Offset Loads, suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS40861 Hanger, structural steel must be run parallel to the Knight rail system.

Used for Direct or Offset Loads, suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS40821 Short Stack I-Beam Hanger, structural steel must be run parallel to the Knight rail system.