Knight Global’s MRAA4228 Limit Switch attaches to the RAD4110, RAD6110 and RAD7510 Series Rail and is typically used to prevent the workstation crane system from going past pre-defined limits such as; End of travel (EOT) Limits, Pick-up Locations, Drop-Off Locations, and Home Positions. The MRAA4228’s Limit Switch will trigger an electric signal whenever a system reaches the pre-determined point of travel.

Knight Global’s MRAA4205 Bridge Braces attach to the RAD4110, RAD6110, and RAD7510 Series Rail. Used for 24 in. , 30 in. , or 36 in. center to center bridges. Knight’s Bridge Braces are used to secure parallel rails at specific distances from each other.
If bridges are 15 ft. or more, (2) two Bridge Braces must be used.

Knight Global’s MRAA4926 Bridge Bumper is a bolt-on design that attaches to the majority of load trolleys and end trucks, except for the low profile designs. It is typically used to avoid contact between two bridges on runways that have multiple bridges. The MRAA4926 absorbs the impact between two bridges on the same runway. (2) two bridge bumpers are required per bridge.

Knight Global’s MRAA4359 Rail Brake is a bolt-on design that attaches to the majority of load trolleys and end trucks, except for the low profile designs and the TR2000 Series Rail. The MRAA4359 is typically used when the operator needs to lock a trolley or end truck from moving in the bridge or runway rail. The locking feature allows the operator to accurately

Knight Global’s MRTA6126 transfers and suspends Knight’s ATA2800 or ATA2900 Torque Tubes along the horizontal axis.

Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA6102 transfers loads along the horizontal axis and suspends Knight Torque Arms and fixtures from Knight’s RAD6110 Series Overhead Aluminum Rail Systems.

Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

The KSAA1059 Servo Load Trolley transfers loads along the horizontal axis and suspends Knight Servo Hoists from Knight’s RAD6110 series rail systems.
(Previously EBA1173)

Knight Global’s RMD4115 is used in conjunction with the rail system hose management kits to create the systems festooning to supply air to the tooling or end effectors.

Knight Global’s RMD4113 is used in conjunction with the rail system hose management kits to create the systems festooning to supply air to the tooling or end effectors.

The MRTA6106 Load Trolley suspends Knight pneumatic balancers and fixtures from RAD6110 series aluminum rail systems.