Low Profile Rigid End Truck (Tri-Runway)
The MRES61351 Center Bridge Low Profile Rigid End Truck suspends Knight low profile center bridges. The low profile end truck design reduces stack-up heights. Rigid End Trucks are typically used on applications where the bridge must remain perpendicular to the runway when the precise loading or unloading of a product is required. This End Truck is used on center bridges in a
Rigid End Truck (Tri-Runway)
The MRES61361 Center Bridge Rigid End Truck suspends Knight low profile center bridges. Rigid End Trucks are typically used on applications where the bridge must remain perpendicular to the runway when the precise loading or unloading of a product is required. This End Truck is used on center bridges in a tri-runway system.
Knight End Trucks are manufactured from commercial grade pickled
Air Glide Hose Management System
Knight’s newest product, the (patent pending) AIR GLIDE HOSE MANAGEMENT SYSTEM is a revolutionary new product designed to eliminate the hanging of festooning / air lines / hoses on aluminum rail. The Air Glide can be used with Knight’s RAD4110, RAD6110, and RAD7510 series rail and it can be attached to any runway or bridge rail. It can also be designed to fit
Extended Stack I-Beam Hanger (7in-11in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS42185 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
Extended Stack I-Beam Hanger (2in-7in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS40385 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
I-Beam Hanger (7in-11in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS42184 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
I-Beam Hanger (2in-7in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS40384 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
Extreme Low Profile Parallel Rigid Hanger with Safety Cable Kit
The MRHS4503 Extreme Low Profile Parallel Rigid Hanger with NICORWA4133 Safety Cable kit is used for Direct Loads Only. It suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using Knight’s MRHS4503 Hanger, structural steel can only be run parallel to the Knight rail system.
The Safety Cable Kit is included and consists of (2) Copper Oval Sleeves, (2) cable
Extreme Low Profile Perpendicular Rigid Hanger with Safety Cable Kit
The MRHS4500 Extreme Low Profile Perpendicular Hanger with NICORWA4133 Safety Cable kit is used for Direct Loads Only. It suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using Knight’s MRHS4500 Hanger, structural steel can only be run perpendicular to the Knight rail system.
The Safety Cable Kit is included and consists of (2) Copper Oval Sleeves, (2) cable thimbles
Safety Cable Kit with Oval Sleeves
Knight Global’s NICORWA4133 Safety Cable Kit prevents pneumatic balancers or fixtures from separating or falling from the overhead mounted trolleys, end trucks, or hangers in the event of an accident.
Replaces the CAMIRWA4133 Safety Cable Kit.