Knight Global’s MRAS4454 Redundant End Cap attaches to the end of the RAD4110 Series Rail. It is primarily used to prevent an end truck or load trolley from exiting the rail. The MRAS4454 is a combination of the MRAA4011 End Cap and the MRAA4455 Mid-Rail Stop.

Knight Global’s MRAA4462 End Cap with Shock attaches to the end of the RAD4110 Series Rail. It absorbs up to 229 ft. lbs. of striking force from the load trolley to reduce the impact on the end cap. The MRAA4462 is required for applications using a Telescoping Bridge, Servo Hoist, or where the load trolley will frequently contact the end of the

Knight Global’s MRAA4011 End Cap attaches to the end of the RAD4110 Series Rail. The MRAA4011 End Cap is primarily used as a dust cover for the RAD4110 rail. Knight’s MRAA4011 End Cap prevents an end truck or load trolley from exiting the rail, but is not to be used as a primary stop for the rail. When used in conjunction with a

Knight Global’s MRMA4215 Hose Trolley with Cable Saddle supports the electrical festooning for Knight’s RAD4110 Series Aluminum Rail Systems. It has velcro straps that allow for fast and easy installation of electrical cables. The MRMA4215 can support up to 2 in. cables or hoses.

Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of

Knight Global’s MRMA4019 Hose Trolley carries festooning on Knight’s RAD4110 Series Overhead Aluminum Rail Systems. When using Knight’s MRMA4019 Hose Trolley alternate the “U” bolts from inside to outside when installing the festoon hose, this will allow for minimal stack-up lengths. Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi

Knight Global’s MRTA4392 Low Profile Load Trolley with Yoke transfers loads along the horizontal axis and suspends Knight Articulating Arm Carriages and fixtures from Knight’s RAD4110 Series Overhead Aluminum Rail Systems. Knight Low Profile Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA4312 Low Profile Load Trolley with Bosses transfers loads along the horizontal axis and suspends Knight Torque Arms and fixtures from Knight’s RAD4110 Series Overhead Aluminum Rail Systems. Knight Low Profile Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA4003 Load Trolley with Bosses transfers loads along the horizontal axis and suspends Knight Torque Arms and Articulating Arm Carriages from Knight’s RAD4110 Series Overhead Aluminum Rail Systems. Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA4001 Load Trolley transfers loads along the horizontal axis and suspends fixtures from Knight’s RAD4110 Series Overhead Aluminum Rail Systems. Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

The MRTA4442 Load Trolley suspends Knight pneumatic balancers and fixtures from RAD4110 series aluminum rail systems.