Knight Global’s NICORWA4133 Safety Cable Kit prevents pneumatic balancers or fixtures from separating or falling from the overhead mounted trolleys, end trucks, or hangers in the event of an accident.
Replaces the CAMIRWA4133 Safety Cable Kit.

The MRMA4304 is a fixed hose management cable saddle. It supports the electric or pneumatic festooning for the overhead rail systems. The Fixed End Cable Saddle can be used with Knight’s RAD7510, RAD6110 and RAD4110 Series Rail. The MRMA4304 does not allow for any pivoting of the saddle. The Velcro straps allow for fast and easy installation of hoses.

The MRMS4310 hose management kit for straight hoses on a runway will attach straight hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one runway.

Straight hose and regulator can be purchased separately.

The MRMS4311 hose management kit for straight hoses on a bridge will attach straight hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one bridge.

Straight hose and regulator can be purchased separately.

The MRMS4309 hose management kit for coiled hoses on a bridge will attach coiled hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one bridge.

Coiled hose and regulator can be purchased separately.

The MRMS4308 hose management kit for coiled hoses on a runway will attach coiled hose to Knight’s RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one runway.

Coiled hose and regulator can be purchased separately.

Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS42182 hanger has up to 1.5″ of vertical adjustability. When using the Extended Stack I-Beam Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.

For greater adjustability, please see MRHS42184.

Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS40382 hanger has up to 1.5″ of vertical adjustability. When using the Extended Stack I-Beam Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.

For greater adjustability, please see MRHS40384.

Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHA40351 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.

Knight’s 24″ and 36″ Limit Ramp Assemblies are used to limit the KET3000 movement from within a predetermined work area. (2) are required.