Knight Global’s TRT2203 transfers loads along the horizontal axis and suspends Knight Pneumatic Balancers and Fixtures and Festooning from Knight’s TR2000 Series Aluminum Rail Systems.

Knight Global’s MRTA4293 Low Profile Load Trolley with Eye Hook transfers loads along the horizontal axis and suspends Knight Air Balancers, Hoists and fixtures from Knight’s RAD4110 Series Overhead Aluminum Rail Systems.

Knight Low Profile Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MRTA4229 Load Trolley with Eye Hook transfers loads along the horizontal axis and suspends Knight Air Balancers, hoists and fixtures from Knight’s RAD4110 Series Overhead Aluminum Rail Systems.

Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

The KSAA1080 ERail Maintenance Cleaning Trolley is used to maintain and clean the inside of the electrified rail. Over time, verdigris will develop on the inside of the electrified rail and the nylon brushes of the KSAA1080 will gently scrub that away without causing damage to the ERail.

The Maintenance Cleaning Trolley consists of a modified rail trolley with a slot to insert the

The EMRTA6196 Conductor Trolley travels inside of the red ERail and carries power to the electrical tools/fixtures on the rail system. It is combined with the Knight Load Trolley. Copper graphite shoes are used for energy and control voltages over 35 V.
The ERail Conductor Trolley comes with a protective cord clamp (EMRMA6172) to help prevent damage to the electrical cable. Cable available

Knight’s EMRTA4195 Low Profile Load Trolley with Yoke suspends a load from the ERAD4000 Series Rail System. The trolley’s yoke design allows for pivoting in the “X” and “Y” directions which creates freedom of movement. It attaches to the ERail’s conductor trolley.

Knight’s EMRTA4194 Low Profile Load Trolley suspends a load from the ERAD4000 Series Rail System.  It attaches to the ERail’s conductor trolley.

The EMRTA4192 Load Trolley with Yoke travels along a horizontal axis and suspends loads from the ERAD4000 Series rail system. The trolley’s yoke design allows for pivoting in the “X” and “Y” directions which creates freedom of movement. It attaches to the ERail’s conductor trolley.

Knight Global’s EMRTA4190 Load Trolley transfers loads along the horizontal axis and suspends a load from The ERAD4000 Series Rail Systems. It attaches to the ERail’s conductor trolley.

The EMRTA4176 Servo Trolley attaches to a Knight Servo Hoist and runs inside of the ERAD4000 Series Rail.