Knight Global’s MRAA4205 Bridge Braces attach to the RAD4110, RAD6110, and RAD7510 Series Rail. Used for 24 in. , 30 in. , or 36 in. center to center bridges. Knight’s Bridge Braces are used to secure parallel rails at specific distances from each other.
If bridges are 15 ft. or more, (2) two Bridge Braces must be used.

Knight Global’s MRAA4926 Bridge Bumper is a bolt-on design that attaches to the majority of load trolleys and end trucks, except for the low profile designs. It is typically used to avoid contact between two bridges on runways that have multiple bridges. The MRAA4926 absorbs the impact between two bridges on the same runway. (2) two bridge bumpers are required per bridge.

Knight Global’s MRAA4359 Rail Brake is a bolt-on design that attaches to the majority of load trolleys and end trucks, except for the low profile designs and the TR2000 Series Rail. The MRAA4359 is typically used when the operator needs to lock a trolley or end truck from moving in the bridge or runway rail. The locking feature allows the operator to accurately

Knight Global’s MRTA7726 transfers and suspends Knight’s ATA2600 or ATA2700 Torque Tubes along the horizontal axis. Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

The EBA1293 Load Trolley with Brake transfers loads along the horizontal axis and suspends Knight Servo Hoists from Knight’s RAD7510 Series Rail Systems. The EBA1293 is typically used when an operator needs to lock or park a servo hoist from moving in a bridge or runway. This pneumatic brake feature allows for accurate loading and unloading of products.

The KSAA1050 Load Trolley transfers loads along the horizontal axis and suspends Knight Servo Hoists from Knight’s RAD7510 series rail systems.
(Previously EBA1030)

Knight Global’s RMD4115 is used in conjunction with the rail system hose management kits to create the systems festooning to supply air to the tooling or end effectors.

Knight Global’s RMD4113 is used in conjunction with the rail system hose management kits to create the systems festooning to supply air to the tooling or end effectors.

The MRAA4805 attaches to the end of the RAD7510 Series Rail. Absorbs up to 229 ft. lbs. of striking force from the load trolley to reduce the impact on the end cap. Required for applications using a Telescoping Bridge, Servo Hoist, or where the load trolley will frequently contact the end of the rail.

The MRAA4804 End Cap attaches to the end of the RAD7510 Series Rail. Not to be used as a primary stop for the rail.