V-Sway Brace (2in-7in Flange)
The MRWS40161 V-Sway Brace stabilizes Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems.
Tubing Rod and Ball Hanger
Used for Direct Loads Only and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS41571 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
I-Beam Rod and Ball Hanger (7in-11in Flange)
Used for Direct Loads Only and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS40431 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
I-Beam Rod and Ball Hanger (2in-7in Flange)
Used for Direct Loads Only and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS40361 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
I-Beam Extended Stack Rod and Ball Hanger (7in-11in Flange)
Used for Direct Loads Only and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS40511 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
I-Beam Extended Stack Rod and Ball Hanger (2in-7in Flange)
Used for Direct Loads Only and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS40471 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
C-Channel Rod and Ball Hanger
Used for Direct Loads Only and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHS4034 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
C-Channel Bolt-On Hanger with Rail Clamp
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHA4035 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
THIS PRODUCT IS NO LONGER AVAILABLE
REFER TO MRHA40351
C-Channel Bolt-On Hanger
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using the MRHA4135 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
Splice Kit
The MRHA7585 Splice Kit is a bolt-on kit that provides easier access to the head bolts. While cross bolts are supplied and Knight suggests their use on every other hanger as a minimum, they are required when:
A) Local Safety Regulations/ Specifications dictate their use and
B) when a Knight Splice Kit is used and/ or when a Knight Hanger is used