Knight Global’s MHTA3018 Extended Load Trolley transfers loads along the horizontal axis and suspends fixtures from Knight’s HAD3000 or HAD3500 Series Aluminum Rail Systems. Knight’s Dual Trolley design provides added stability to prevent the trolley from rocking.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield

Knight Global’s MHTA3009 Extended Load Trolley transfers loads along the horizontal axis and suspends fixtures from Knight’s HAD3000 or HAD3500 Series Aluminum Rail Systems.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MHTA3016 Low Profile Load Trolley transfers loads along the horizontal axis and suspends fixtures from Knight’s HAD3000 or HAD3500 Series Aluminum Rail Systems. Knight’s Dual Trolley design provides added stability to prevent the trolley from rocking.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a

Knight Global’s MHTA3013 Load Trolley with Cable Saddle carries festooned hose and cable used in hose management kits for Knight’s HAD3000 or HAD3500 Series Aluminum Rail Systems. Knight’s MHTA3013 attaches to Knight’s MHMA3180 or MHMA3181 Cable Saddle.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and

Knight Global’s MHTA3011 Low Profile Load Trolley transfers loads along the horizontal axis and suspends fixtures from Knight’s HAD3000 or HAD3500 Series Aluminum Rail Systems.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MHTA3031 Balancer Load Trolley transfers loads along the horizontal axis and suspends Knight Air Balancers from Knight Global’s HAD3000 or HAD3500 Series Aluminum Rail Systems.
Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Knight Global’s MHAA3021 Splice Kit is a bolt-on kit that connects or joins (2) two sections of the HAD3500 Series Rail.

The MHAA3020 End Cap or Mid-Rail Stop attaches to the HAD3000 or HAD3500 series rail. When used as a mid-rail stop, it is typically used to separate the working area of the rail. When used as an end cap it prevents the load trolley from exiting the rail.

Attaches to the MHTA3013 Load Trolley. MHMA3181 Cable and Hose Saddle supports a hose width of 1.5 in. and reduces stack-up widths.

Attaches to the MHTA3013 Load Trolley. MHMA3180 Cable and Hose Saddle supports a hose width of 0.75 in. and allows minimal stack-up widths.