Power Feed End Cap Assembly
The EMRAA4183 Power Feed End Cap Assembly attaches to the end of the ERAD4000 Rail and ERail. It is primarily used to prevent a load trolley from exiting the rail.
End Cap Assembly
The EMRAA4182 End Cap Assembly attaches to the end of the ERAD4000 Rail and ERail. It is primarily used to prevent a load trolley from exiting the rail.
Extending Stack I-Beam Hanger (7in-11in Flange)
The EMRHS4262 Extending Stack I-Beam Hanger is used for Direct or Offset Loads and suspends Knight’s ERAD4000 Series Aluminum Rail Systems and ERail. When using the EMRHS4262 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
Low Profile Rotating End Truck
The EMRES4185 Low Profile Rotating End Truck suspends Knight’s ERAD4000 Series Rail and the ERail. The end truck’s yoke design allows for the pivoting in the “X” and “Y” directions which creates freedom of movement.
The EMRES4185-4000 runs inside of Knight’s RAD4110 Series Rail.
Rotating End Truck
Knight’s Rotating End Truck for ERAD4000 suspends Knight’s ERail and ERAD4000 Rail. The End Truck’s Yoke design allows for the pivoting in the “X” and “Y” directions which creates freedom of movement.
The EMRES4181-4000 runs inside of Knight’s RAD4110 Series Rail.
Cord Clamp
The EMRMA6172 Cord Clamp is used in conjunction with the ERail trolley to prevent damage to the electrical cable as the trolley travels through the rail.
C-Channel Hanger Sub-Assembly
The EMRHA4165 C-Channel Hanger Sub-Assembly is used for Direct or Offset Loads and suspends Knight’s ERAD4000 Series Aluminum Rail Systems and the ERail. When using the EMRHA4165 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
C-Channel Hanger Assembly
Knight’s EMRHA4161 C-Channel Hanger Assembly is used for Direct or Offset Loads and suspends Knight’s ERAD4000 Series Aluminum Rail Systems and ERail. It can attach to all C-Channel or Angle Iron. When using the EMRHA4161 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
ERail Splice Kit
Knight’s EMRHA4178 ERail Splice Kit is a bolt-on splice kit used to splice together (2) sections of ERail and (2) sections of ERAD4000 or ERAD6000 series rail. It provides easier access to the bolt heads and eliminates the need to weld bosses.
Extending Stack I-Beam Hanger (2in-7in Flange)
The EMRHS4162 Extending Stack I-Beam Hanger is used for Direct or Offset Loads and suspends Knight’s ERAD4000 Series Aluminum Rail Systems and ERail. When using the EMRHS4162 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.