The EMRHA7178 ERail Splice Kit is a bolt-on splice kit used to splice together (2) sections of ERail and (2) sections of ERAD7000 series rail. It provides easier access to the bolt heads and eliminates the need to weld bosses.

Knight’s EMRHA4178 ERail Splice Kit is a bolt-on splice kit used to splice together (2) sections of ERail and (2) sections of ERAD4000 or ERAD6000 series rail. It provides easier access to the bolt heads and eliminates the need to weld bosses.

Knight Global’s MHAA3021 Splice Kit is a bolt-on kit that connects or joins (2) two sections of the HAD3500 Series Rail.

Bolt-on kit that connects or joins (2) two sections of the HAD3000 series rail. The MHAA3012 “O” ring seal provides an air tight seal for applications using the HAD3000 rail as fluid power or air distributor.

The MRHA7585 Splice Kit is a bolt-on kit that provides easier access to the head bolts. While cross bolts are supplied and Knight suggests their use on every other hanger as a minimum, they are required when:
A) Local Safety Regulations/ Specifications dictate their use and
B) when a Knight Splice Kit is used and/ or when a Knight Hanger is used

The MRHA7503 Splice Kit is a bolt-on kit that provides easier access to the head bolts. While cross bolts are supplied and Knight suggests their use on every other hanger as a minimum, they are required when:
A) Local Safety Regulations/ Specifications dictate their use and
B) when a Knight Splice Kit is used and/ or when a Knight Hanger is used

The MRHA4485 Splice Kit is a bolt-on kit that provides easier access to the head bolts. For RAD4110, RAD6110 and RAD7510 series aluminum rail. Hanger placement directly over the splice is preferred. If unable to do so, a hanger must be placed within one foot of the splice. Exceptions to this practice would be for mounting servo tractors, extreme weights and for

The MRHA4445 Splice Kit is a bolt-on kit that provides easier access to the head bolts. For RAD4110, RAD6110 and RAD7510 series aluminum rail. Hanger placement directly over the splice is preferred. If unable to do so, a hanger must be placed within one foot of the splice. Exceptions to this practice would be for mounting servo tractors, extreme weights and for

The TRS2067 Splice Kit is a bolt-on kit that connects or joins (2) two sections of TR2000 Series Rail without the need to weld bosses and provides an easier access to the head bolts. Load hangers must be used within 2 ft. on both sides of a splice or a single hanger must be used on the splice joint.

Knight Global’s MLRA9505 Splice Kit is a bolt-on kit that connects or joins (2) two sections of LRD9500 series rail without the need to weld bosses and provides an easier access to the head bolts.