Extended Stack I-Beam Hanger (7in - 11in Flange)
Used for Direct Loads, This I-Beam Hanger suspends Knight’s TR2000 Series Aluminum Rail Systems. When using the TRH22185 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
The hanger also has vertical adjustability of up to 2″.
The TRH22185 Hanger is coated with an environmentally friendly corrosion protectant.
I-Beam Hanger (7in - 11in Flange)
Used for Direct Loads, This I-Beam Hanger suspends Knight’s TR2000 Series Aluminum Rail Systems. When using the TRH22184 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
The hanger also has vertical adjustability of up to 2″.
The TRH22184 Hanger is coated with an environmentally friendly corrosion protectant.
Extended Stack I-Beam Hanger (2in - 7in Flange)
Used for Direct Loads, This Extended Stack I-Beam Hanger suspends Knight’s TR2000 Series Aluminum Rail Systems. When using the TRH20385 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
The TRH20385 Hanger is coated with an environmentally friendly corrosion protectant.
I-Beam Hanger (2in - 7in Flange)
Used for Direct Loads, This I-Beam Hanger suspends Knight’s TR2000 Series Aluminum Rail Systems. When using the TRH20384 Hanger, structural steel can be run perpendicular or parallel to the Knight rail system.
The TRH20384 Hanger is coated with an environmentally friendly corrosion protectant.
Extended Stack I-Beam Hanger (7in-11in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS42185 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
Extended Stack I-Beam Hanger (2in-7in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS40385 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
I-Beam Hanger (7in-11in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS42184 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
I-Beam Hanger (2in-7in Flange)
Used for Direct or Offset Loads and suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. The MRHS40384 hanger has up to 2.0″ of vertical adjustability. When using this I-Beam Hanger, structural steel can be run perpendicular OR parallel to the Knight rail system.
Extreme Low Profile Parallel Rigid Hanger with Safety Cable Kit
The MRHS4503 Extreme Low Profile Parallel Rigid Hanger with NICORWA4133 Safety Cable kit is used for Direct Loads Only. It suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using Knight’s MRHS4503 Hanger, structural steel can only be run parallel to the Knight rail system.
The Safety Cable Kit is included and consists of (2) Copper Oval Sleeves, (2) cable
Extreme Low Profile Perpendicular Rigid Hanger with Safety Cable Kit
The MRHS4500 Extreme Low Profile Perpendicular Hanger with NICORWA4133 Safety Cable kit is used for Direct Loads Only. It suspends Knight’s RAD4110, RAD6110, or RAD7510 Series Aluminum Rail Systems. When using Knight’s MRHS4500 Hanger, structural steel can only be run perpendicular to the Knight rail system.
The Safety Cable Kit is included and consists of (2) Copper Oval Sleeves, (2) cable thimbles