Knight Global’s MRAA4926 Bridge Bumper is a bolt-on design that attaches to the majority of load trolleys and end trucks, except for the low profile designs. It is typically used to avoid contact between two bridges on runways that have multiple bridges. The MRAA4926 absorbs the impact between two bridges on the same runway. (2) two bridge bumpers are required per bridge.

Knight Global’s MRAA4359 Rail Brake is a bolt-on design that attaches to the majority of load trolleys and end trucks, except for the low profile designs and the TR2000 Series Rail. The MRAA4359 is typically used when the operator needs to lock a trolley or end truck from moving in the bridge or runway rail. The locking feature allows the operator to accurately

Attaches to the TR2000 Series Rail and is typically used to prevent the workstation crane system from going past pre-defined limits such as; End of Travel (EOT) Limits, Pick-up Locations, Drop-Off Locations and Home Positions. The TRA2224’s Limit Switch will trigger an electric signal whenever a system reaches the pre-determined point of travel.

Allows for the maintenance and/ or inspection of a load trolley while it is still in the rail. The TRA2449 is typically used on existing applications where an access gate is needed. Knight’s TRA2449 Add-On Access Gate is a bolt-on kit; but will require the cutting of the rail on existing rail application installations. (New rail installations would come pre-cut for the access

The TRS2067 Splice Kit is a bolt-on kit that connects or joins (2) two sections of TR2000 Series Rail without the need to weld bosses and provides an easier access to the head bolts. Load hangers must be used within 2 ft. on both sides of a splice or a single hanger must be used on the splice joint.

Knight Global’s ETA1045 Gear Rack Installation Clamp assists in the installation of the linear gear rack by holding the rack in position, tight to the bottom of the rail. It can also be used as a gauge, to splice two pieces of rack together for a perfect assembly process. Used with the Knight Servo Tractors.

The TRA5004 Tow Bar Assembly attaches to Knight’s TRA5500 Series Air Tractor. It allows for Knight Air Tractors to tow the overhead rail bridge. The TRA5004 tows Knight’s RAD4110, and RAD7510 series aluminum rail.

Table controls come standard with 400 p.s.i ContiTech FLEXAGrip™ Rubber Hosing and Fittings. Table controls are available in several configurations such as: free-standing pedestal, foot control, or bolt-on hand controls. All steel construction provides long lasting durability.

For high traffic areas, heavy duty Steel Braided Hydraulic Hosing and Fittings are optional.

Protective covering that serves as a barrier for the operator.

All steel reinforced construction ensures a safe and sturdy mounting base.